신품 목재 파쇄기 Stiler RĘBAK TARCZOWY CIĄGNIKOWY BX 62R, TRACTOR WOOD CHIPPER 15CM

STILER BX 62R SWOOD CHIPPER.

The STILER BX62R WOOD CHIPPER is used for shredding branches, tree trunks up to 15 cm in diameter, with roots up to 30 cm.

A newer reinforced model.

EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!!

Technical data:

    Model: BX62R
    The size of the shredded material: 15cm in diameter (maximum 30cm with roots)
    Drive system: Drive from tractor engine transmitted by PTO
    Minimum tractor power: 30 hp
    Rotor size: 740 mm
    Rotor thickness: 25 mm
    Number of cutting knives: 4 + 1 counterblade
    Knife type: Hardened tool steel CR12
    Material feeding mechanism: Own hydraulic pump - 2 gears
    Mounting system: Three-point suspension system (three-point linkage)
    Dimensions (with folded hopper): 127cm D x 132cm S x 215cm
    Rotation range of the ejection tube: 360 °
    The height of the ejection tube: 215 cm
    Nominal revolutions per minute / Nominal revolutions: 540-1000
    Chipper weight: 485 kg

Included:

    PTO OF POWER RECEIPT (PTO) FREE!

Specification:

    The material collecting system consists of two hydraulically driven cogged shafts.
    The material retrieval mechanism has a 10-step speed controller and a material dispensing function.
    The hydraulic system drive comes from own hydraulic pump.
    The chipper has a massive disc with a diameter of 740 mm and a thickness of 25 mm.
    There are 4 cutting blades on both sides, sharpened 240 mm x 60 mm.
    In addition, the shield shield is secured against a knife.
    The construction of the rotor allows for long-term work without loading the tractor.
    All bearings protected against dust, stripping, etc. are lubricated by easily accessible calendars.
    The disc also has breakers (shovels) shredding the resulting framework to a value of 20-50 mm.
    The chipper with a three-point linkage (TUZ) is designed to work with a farm tractor with a minimum power of 30 km.
    The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is cut in the event of too much load on the machine and disconnects the direct drive.
    The chipper is additionally equipped with shield ventilation.
    The set also includes PTO PTO shaft
    The generated chips are thrown by a tube rotated by 360 ° in relation to the chipper's base.
    The chips obtained have dimensions from 20mm to 60mm.

4 knives sharpened on both sides ensure very high productivity and longevity of the machine. The blades are made of hard tool steel. The machine has 1 counterblade.

The back of the shield has been equipped with breakers and shovels for more efficient ejection of chips from the machine

The machine has two hydraulic feeding rollers. They accelerate work and make it easier to feed branches to the target. In addition, the machine has 10 feed speeds and reverse gear for branch retraction.

The revolutions are transmitted through a power take-off shaft where we connect the machine directly to the tractor shaft. The minimum required rotation of the roller is 540 rpm.

The machine is equipped with a three-point linkage suspension system.